000
Chapter 3: Basic Operations
37
Live Adjustments
Switching between Two Devices
Connected to a Single Input
You can connect two video input devices each for
inputs 1 to 4 and switch input assignments.
Press the ASSIGN button, press the row B button
number for which you want to switch the input,
and then tap the connector to which you want to
switch in the [INPUT] menu.
Tap to switch between the
two inputs.
The video may distort at the moment of switching,
so be sure to check the video in the [NEXT] viewer.
Adjusting the Headphone Volume
Display the [UTILITY 1/3] menu, tap and select
(light) [HEAD PHONES], and adjust the volume
using the slider.
You can adjust too a level between 1 to 16
(increments of 1).
Drag the slider to
adjust the volume.
[Tips]
ˎ
ˎ
Audio is not completely disabled at level 1.
ˎ
ˎ
When using earphones or headphones, be careful not to
raise the volume too high. Prolonged exposure to high
volumes that stimulate the ears may cause adverse effects
to hearing.
ˎ
ˎ
Decrease the volume before connecting or disconnecting
input devices (input signals) and headphones.
Adjusting the Overall Audio Level
Use the PGM master fader to adjust the PGM
output level.
Perform adjustments while viewing the audio level
meters in the multi-viewer.
Move the fader to adjust
the PGM output level.
Adjusting Individual Audio Levels
When the voice of a speaker or the sound of
an instrument is too loud or small, display the
[AUDIO] menu for the corresponding channel and
readjust the input level.
Drag the slider to adjust
the input level.
Enabling/Disabling Use of Audio
Channels
Display the [AUDIO] menu for the corresponding
channel, and select or deselect [CH ON].
