000
21
Chapter 2: Preparation
Startup and Shutdown
Configuring the Initial Settings (First-
Time Startup)
When turning on the unit for the first time, follow
the instructions on the screen to configure the
initial settings.
1
Press the power switch on the front of the unit.
When the unit turns on, the
(power)
indicator lights green.
After startup, the initial settings screen appears
on the menu panel (touch panel).
The multi-viewer appears on the external
monitor.
2
Configure the initial settings.
Select the time zone, and tap [DONE].
Tap [
] or [
] to
display your region.
Tap [DONE] to proceed to the
next screen.
Select (light) this to enable
daylight savings time.
Configure the current date, and tap
[DONE].
Tap [
] or [
] to
display the current
year, month, and
day.
Tap [
] to return to the previous
screen.
Configure the current time, and tap
[DONE].
Tap [
] or [
] to
display the current
hour and minute.
Select the video signal format for the unit
(i.e., system format), and tap [DONE].
This completes the initial settings, and the
unit is ready for operations.
[Tips]
Controls from a computer connected to the unit will be
possible after the initial settings are complete.
Second and Subsequent Startup
Press the power switch on the front of the unit to
turn on the unit.
A menu screen will appear on the menu panel
(touch panel) after startup, and the unit will be
ready for operations.
Auto Power Off Function
The unit is equipped with an auto power off
function that automatically turns off the unit if it is
not operated for a specified amount of time.
A message will appear in the menu panel if no
operations are performed on the unit's control
panel or on the PC UI computer. If no operations
are performed for another 3 minutes, the unit
automatically turns off.
You can change the amount of time before auto power off.
For details on settings, see “[System] Screen” (page 61) in the
"Configuring the System Settings" section.
[Tips]
If you perform an operation while the message is displayed,
the unit will return to normal status.
To turn on the unit again after auto power off
Press the power switch twice.
Turning the Unit Off
Press the power switch. When a confirmation
message appears, select [YES] to turn off the unit.
