A
d
mini
s
tra
ting
t
he
Came
ra
Recording Images in Memory — Image memory setting Menu
45
Overwrite
Select to overwrite the file or not when there is
insufficient memory space to record the image.
Select
On
to overwrite the oldest file or folder.
Select
Off
to prohibit overwriting. In this case, a new
file cannot be stored.
Capacity warning
Select
On
to send a warning mail to the Administrator
when the built-in memory space is low or the memory is
full. Select
Off
if you do not want to send a warning
mail.
Note
When the Overwrite is set to
On
, a warning mail is not
sent to the Administrator.
SMTP server name
Type the name of the SMTP server to use for sending an
e-Mail, up to 64 characters.
Otherwise type the IP address of SMTP mail server.
Authentication
Select the authentication required when you send an e-
Mail.
None:
Select if no authentication is required when an e-
Mail is sent.
SMTP authentication:
Select if authentication is
required when an e-Mail is sent.
POP before SMTP:
Select if POP before SMTP
authentication is required when an e-Mail is sent.
POP server name
This is necessary when
POP before SMTP
is selected
in
Authentication
.
Type POP (receiving mail) server name up to 64
characters. Otherwise type the IP address of POP server.
This setting is necessary when SMTP server that sends a
mail authenticates using the account of POP user.
User name, password
Type the user name and the password of the user who
has the mail account. This setting is necessary when
SMTP server that sends a mail authenticates.
Administrator e-Mail address
Type the e-Mail address of the recipient of the warning
mail (e-Mail address of the camera Administrator), up to
64 characters.
OK/Cancel
See “Buttons common to every setting menu” on page
26.
Alarm recording Tab — Setting the
Image Memory Function when
Detecting the Alarm
You can set to record the image and audio file to the
built-in memory linked with the external sensor input or
with the built-in motion detection function.
Alarm recording
Select
On
to set to record the image and audio file to the
built-in memory linked with the external sensor input or
with the built-in motion detection function.
Image file name
Type the file name you want to assign to the images
when saving in the built-in memory. You can use up to
10 alphanumeric characters, - (hyphen) and _
(underscore) for naming.
Suffix
Select a suffix to add to the file name.
Date & time:
The Date & time suffix is added to the
Image file name.
The Date & time suffix consists of lower two-digits
of year (2 digits), month (2 digits), date (2 digits),
hour (2 digits), minute (2 digits), second (2 digits)
and consecutive number (2 digits), thus 14-digit
number is added to the file name.
Sequence number:
A consecutive number of 10 digits
between 0000000001 and 4294967295 and an
consecutive 2 digits number is added to the Image
file name.
Tip
A consecutive number added to
Date & time
and
Sequence number
is used to identify each of multiple
files created with one alarm event.
