Sony IP55, Руководство пользователя

Страница: 43 / 78

5-7
Network Settings
Chapter 5: Configuration
Network Diagnostic
Here you can run the diagnostic tool for your current network settings and it will show error messages if
any anomaly is detected. For further information on error messages, please refer to the FAQ section at www.
comprousa.com for more information.
Network Bandwidth
This automatic network connection speed detection is to help users better define appropriate video bit rate
for their applications. To perform network bandwidth test:
1. In [Setup] > [Network], click on [Network Bandwidth] located on the left menu to start.
2. Wait for Internet Explorer to prompt for the installation of Java plug-in. Then click on the text to
accept.
3. Camera begins detecting connection speed.
4. Once speed diagnostics is done, camera will advise current user on network speed. See below
example:
The message indicates that currently connected network has a bandwidth to support up to 10 network
cameras of identical bit rate settings (either on Stream 1 or Stream 2). If the message shows a less favorable
result, go to [Setup] > [Video] to lower current video bit rate values