Sony HVR-M10C, Руководство по обслуживанию

Страница: 204 / 329

6-52
HVR-M10C/M10E/M10J/M10N/M10P/M10U
6-2. VIDEO SECTION ADJUSTMENT
2-1. PREPARATIONS BEFORE ADJUSTMENTS
Use the following measuring instruments for video section adjustments.
Fig. 6-2-1.
J-1 J-2 J-3
Adjustment remote
commander
(RM-95 upgraded)
J-6082-053-B
Extension cable
(28P 0.8mm)
J-6082-566-A
CPC-8 jig
J-6082-388-A
13) DV Alignment tapes
• Tracking standard (XH2-1A1)
Parts code: 8-967-999-03
• SW/OL standard (XH2-3)
Parts code: 8-967-997-11
• Audio operation check for NTSC (XH5-3)
Parts code: 8-967-997-51
• System operation check for NTSC (XH5-5)
Parts code: 8-967-997-61
14) Adjustment remote commander (J-6082-053-B)
15) CPC-8 jig (J-6082-388-A)
16) Extension cable (28P 0.8mm) (J-6082-566-A)
For extension between the DA-033 board (CN104) and the DB-
018 board (CN205)
2-1-1. Equipment to Required
1) TV monitor
2) Oscilloscope (dual-phenomenon, band width above 30 MHz
with delay mode) (Unless specified otherwise, use a 10 : 1
probe.)
3) Frequency counter
4) Pattern generator with video output terminal
5) NTSC vectorscope
6) PAL vectorscope
7) Digital voltmeter
8) Audio generator
9) Audio level meter
10) Audio distortion meter
11) Audio attenuator
12) Regulated power supply
J-4 J-5 J-6
J-7 J-8 J-9
J-10 J-11 J-12
J-13 J-14
Cleaning fluid
Y-2031-001-0
J-15
Wiping cloth
7-741-900-53
Super-fine applicator
(made by Nippon
Applicator (P752D))
Mirror (small oval type)
J-6080-840-A
Tracking tape
(XH2-1)
(NTSC, PAL)
8-967-997-01
Mini DV
torque cassette
J-6082-360-A
FWD/BACK
T adjustment
screwdriver
J-6082-187-A
Torque screwdriver
J-9049-330-A Tape path screwdriver
J-6082-026-A
Mode Selector II
J-6082-282-B
Mode Selector II
conversion board (Z)
J-6082-493-A
Mode Selector II ROM
(supporting Z
mechanism)
*Note 1
J-6082-314-G