Sony HVR-M10C, Руководство по обслуживанию

Страница: 167 / 329

6-24
HVR-M10C/M10E/M10J/M10N/M10P/M10U
1-3-14. TG7 Arm Block Assy and Pinch Arm Assy
2. Attachment procedure
1) Hold the torsion spring (pinch return)
3
with tweezers. Confirm
that the hook faces upward and install it in the bearing.
2) Hold the pinch arm assy
2
as shown in
D
and install it in the
pinch arm bearing.
3) Hold the torsion coil spring (pinch return)
3
with tweezers
and install it as shown in
E
.
4) Apply grease on the supporting surface of the TG7 pivot shaft.
Amount of grease: a ball of grease of 0.5 mm diamte
Re-application of grease to the point which is greased already
before is not necessary.
5) Hold the TG7 arm block assy
1
as shown in
B
and insert it in
the pivot shaft of the TG7 arm.
6) Hold the torsion spring (pinch return)
3
with tweezers and
install it on the hook of the TG7 arm block assy
1
as shown in
C
.
7) Confirm that the torsion spring (pinch return)
3
does not
override on the pinch supporting shaft.
1. Removal procedure
1) Remove the TG7 arm block assy
1
.
2) Rotate the pinch arm assy 2 in the direction of the arrow A
and remove it.
3) Remove the torsion spring (pinch return)
3
.
A
D
E
B
C
1
TG7 arm block assy
Grease application point
Amount of grease:
a ball of grease of 0.5 mm
diameter
TG7 arm
block assy
TG7 arm block assy
TG7 ARM BLOCK ASSY
2
Pinch arm assy
Pinch arm assy
Supporting surface
TG7 pivot
shaft
Pinch arm assy
Pinch arm assy
When installing it, do not press
the top of the roller to install it.
PINCH ARM ASSY
3
Torsion spring
(Pinch return)
(The spring hook faces upward.)
Apply Grease
Key Points
in Re-assembling
Key Points
in Re-assembling
Points to be noted
Re-application of grease to
the point which is greased
already before is not necessary.