Sony HDV HVR-Z7E, Руководство по обслуживанию, Страница: 291 / 507

6-107
HVR-Z7J/Z7U/Z7N/Z7E/Z7P/Z7C
6) Insert the cam gear shaft 6 in the LS cam plate groove
5
.
Position of alignment
Slide the LS chassis to the position so that the conversion gear
shaft is visible, and insert the cam gear shaft into the LS cam
plate groove.
7) Install the LS chassis block
7
in the direction of the arrow
B
.
(Check if the LS chassis is installed securely in each groove or
shaft.)
8) Install the screw (special head screw M1.4
×
1.4)
8
.
Tightening torque: 0.04
±
0.01 N•m (0.61
±
0.1 kgf•cm)
9) Install the screw (special head screw M1.4
×
1.4)
9
.
Tightening torque: 0.04
±
0.01 N•m (0.61
±
0.1 kgf•cm)
10) By referring to Section “4-2. LS Cam Adjustment”, perform
the LS Cam Adjustment.
3-26. LS Chassis Block, Mechanism Chassis Block-2
7
Install the LS chassis
block in the direction
of the arrow
B
.
B
C
A
8
Screw
(M1.4
×
1.4)
4
GL lack groove
6
Came gear shaft
5
LS cam plate groove
Came gear ass'y
Mode gear ass'y
GL lack shaft
Mecha chassis ass'y
LS chassis ass'y
2
Place the GL rack in the direction of the arrow
A
LS chassis
The position so that the
conversion gear shaft is visible
Position of alignment
9
Screw
(M1.4
×
1.4)
1
Alignment mark
Shafts of the mecha
chassis ass'y
3
Grooves of the LS
chassis ass'y
Be careful not to damage the flexible board.
1. Attachment procedure
1) Enter the
[ULE]
mode.
2) Align the phase alignment mark
1
of the cam gear ass’y and
the mode gear ass’y of the mechanism chassis.
3) Place the GL rack
2
in the direction of the arrow
A
.
4) Insert the mechanism chassis shafts in two locations into the
two grooves of the LS chassis block.
5) Insert the GL rack shaft in the GL rack groove
4
.