Sony HDV HVR-Z7E, Руководство по обслуживанию, Страница: 201 / 507

6-17
HVR-Z7J/Z7U/Z7N/Z7E/Z7P/Z7C
2. Modification of Camera Control Page Data
If the camera control page data has been initialized, change the
data of the “Fixed data-2” address shown in the following table by
manual input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) If 2-digit page is selected, set higher-order digit to page: 0,
address: 10 as data, and then select lower-order digit by a usual
method.
e.g.: Set data: 06 to page: 0, address: 10, and then select page:
D. Thus, the page 6D can be selected.
After the modification of data finished, return the data on page:
0, address: 10 to “00”.
3) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note: If copy the data built in the different model, the cam-
corder may not operate.
4) When changing the data, press the PAUSE button of the ad-
justment remote commander each time when setting new data
to write the data in the non-volatile memory.
5) If all areas were initialized, check that the data at the addresses
for adjustment are initial values (adjustment initial values)
listed in the table. If different, change them to the adjustment
initial values.
Processing after Completing Modification Camera Control
Data:
Order Page Address Data Procedure
1 0 10 00
2 2 00 29
3 2 01 29 Press PAUSE button.
3. 6D Page table
Note 1:
If reading/writing data on pages 6D, set data: 06 to page:
0, address: 10, and then select pages: D. By this data
setting, the pages 6D can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Fixed data-1: Initialized data. (Refer to “1. Initializing
the Camera Control Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of Camera Control Data”)
Address
Initial value
Remark
NTSC PAL
00 to 3F Fixed data-1 (Initialized data)
40 B0 B0
41 00 00
42 60 60
Iris control adj.
43 00 00
44 48 48
45 00 00
46 0B 0B
47 40 40
48 03 03
Iris position adj.
49 4A 4A
4A 01 01
4B B6 B6
4C to 59 Fixed data-1 (Initialized data)
5A 00 00 STD gain adj.
5B Fixed data-1 (Initialized data)
5C 35 35
LV Standard data input
5D 00 00
5E 0B 0B
STD gain adj.
5F 86 86
60 to AF Fixed data-1 (Initialized data)
B0 04 04
B1 00 00
B2 00 00
B3 00 00
B4 00 00
B5 00 00
B6 00 00
B7 00 00
B8 04 04
B9 00 00 Linear matrix adj.
BA 00 00
BB 00 00
BC 00 00
BD 00 00
BE 00 00
BF 00 00
C0 04 04
C1 00 00
C2 04 04
C3 00 00