Sony HDV HVR-Z7E, Руководство по обслуживанию, Страница: 286 / 507

6-102
HVR-Z7J/Z7U/Z7N/Z7E/Z7P/Z7C
3-21. Drum Base Ass’y
H
G
F
Points to be noted
Key Points
in Re-assembling
1
Three screws
(M1.4
×
2.0)
Claw
D
Claw
D
Rail
Groove
B
• Be sure that the claws at two locations
C
of
the rail are placed on the claw bearing
A
of the
drum base block ass'y.
• Be sure that the claw
D
of the rail is inserted inside
the groove
B
of the drum base block ass'y.
Be careful not to hit the drum
base block ass'y against the guide
when installing.
Groove
B
Two dowels
E
Two claws
C
Guide
Claw bearing
A
Claw bearing
A
Claw bearing
A
2
Drum base block ass'y
Drum base
block ass'y
Two claws
C
Two claws
C
1. Removal procedure
1) Enter the
[ULE]
mode.
2) Remove the three screws (special head screw M1.4
×
2.0)
1
.
3) Remove the drum base ass’y
2
in the direction of the arrow.
2. Attachment procedure
1) Install the claw bearing
A
and then groove
B
of the drum
base ass’y
2
in the claws
C
in two locations and the claw
D
of the rail, respectively.
2) Align the two dowels of the drum base ass’y at the
E
position
and install the drum base ass’y
2
.
3) Install the three screws (special head screw M1.4
×
2.0)
1
in
the order of
F
,
G
and
H
.
Tightening torque: 0.04
±
0.01 N•m (0.41
±
0.1 kgf•cm)
4) By referring to Section “4-2. LS Cam Adjustment”, perform
the LS Cam Adjustment.