Sony HDV HVR-Z7E, Руководство по обслуживанию, Страница: 225 / 507

6-41
HVR-Z7J/Z7U/Z7N/Z7E/Z7P/Z7C
8. Linear Matrix Adjustment
RadarW RadarW RadarW
Adjust the matrix coefficient for compensating the variation in
spectral sensitivity.
Adjustment Page 6D
Adjustment Address B0 to F7
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 06.
3) Input the following data to page: D (6D), address: B0 to F7.
Note:
Press the PAUSE (Write) button of the adjustment remote com-
mander each time to set data.
Address Data Address Data
B0 04 D4 04
B1 00 D5 19
B2 00 D6 FF
B3 00 D7 AF
B4 00 D8 00
B5 00 D9 0A
B6 00 DA FF
B7 00 DB B6
B8 04 DC 04
B9 00 DD 70
BA 00 DE FF
BB 00 DF 8F
BC 00 E0 00
BD 00 E1 00
BE 00 E2 FF
BF 00 E3 EC
C0 04 E4 04
C1 00 E5 2C
C2 04 E6 04
C3 00 E7 D5
C4 00 E8 FF
C5 00 E9 74
C6 00 EA FF
C7 00 EB E1
C8 00 EC FF
C9 00 ED 80
CA 04 EE 04
CB 00 EF F3
CC 00 F0 FE
CD 00 F1 EC
CE 00 F2 FF
CF 00 F3 F8
D0 00 F4 FF
D1 00 F5 D5
D2 04 F6 05
D3 00 F7 35
4) Select page: 0, address: 10, and set data: 00.
5) Select page: 0, address: 01, and set data: 00.
7. Black Balance
RadarW RadarW RadarW
Adjust the black level.
Subject Not required
Measurement Point
Measuring Instrument
Adjusting remote commander
Adjustment Page 6E
Adjustment Address C6 to EF
Note 1: If reading/writing data on pages 6E, set data: 06 to
page: 0, address: 10, and then select pages E. By this
data setting, the pages 6E can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to “00”.
Note 2: Check that the data of page: 6, address: 02 is “00”
If not, select page: 6, address: 01, set data: 00, and press
the PAUSE (Write) button.
Switch setting
1) POWER ......................................................... CAMERA mode
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2 6 07 Check the data is “04”.
3 0 10 01
4
6
07 Check the data is “04”.
(16)
5 0 10 00
6 6 01 BF
Press PAUSE (Write) button.
(Note 3)
7 6 02
Check the data changes to
“01”.
Note 3: The adjustment data will be automatically input to page:
6E, address: C6 to EF.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE (Write) button.
2 0 01 00