Sony HDV HVR-Z7E, Руководство по обслуживанию, Страница: 259 / 507

6-75
HVR-Z7J/Z7U/Z7N/Z7E/Z7P/Z7C
1. Lens Jack Supply Voltage Check
Check that +12V is supplied normally from the lens jack.
Mode CAMERA mode
Signal No signal
Measurement Point Lens jack
+ probe: pin
6
– probe: pin
3
Measuring Instrument Digital voltmeter
Specified value A = 12.0
±
1.0 V
Checking method:
Order Page Address Data Procedure
1 0 01 01
2 0 10 09
3
F
27
Set the bit value of bit1 is “1”,
(9F)
and press PAUSE (Write)
button. (Note 1)
4
Check that the voltage of lens
jack pin
6
satisfies the
specified value.
5
F
27
Set the bit value of bit1 is “0”,
(9F)
and press PAUSE (Write)
button. (Note 1)
6 0 10 00
7 0 01 00
Note 1: For the bit values, refer to “6-4. SERVICE MODE”, “4-
4. 3. Bit value discrimination”.
2. Iris Control Adjustment
RadarW RadarW RadarW
Adjust the iris control, and check that it operates normally.
Adjustment Page 6D
Adjustment Address 40 to 45
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 06.
3) Input the following data to page: D (6D), address: 40 to 45.
Note: Press the PAUSE (Write) button of the adjustment remote com-
mander each time to set data.
Address Data
40 AB
41 96
42 5D
43 AD
44 44
45 A3
4) Select page: 0, address: 10, and set data: 00.
5) Select page: 0, address: 01, and set data: 00.
3. Iris Position Adjustment
RadarW RadarW RadarW
Adjust the iris position, and check that it operates normally.
Adjustment Page 6D
Adjustment Address 46 to 4B
Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 06.
3) Input the following data to page: D (6D), address: 46 to 4B.
Note:
Press the PAUSE (Write) button of the adjustment remote com-
mander each time to set data.
Address Data
46 0A
47 B9
48 03
49 93
4A 01
4B 46
4) Select page: 0, address: 10, and set data: 00.
5) Select page: 0, address: 01, and set data: 00.