Sony HDV HVR-Z7E, Руководство по обслуживанию, Страница: 282 / 507

6-98
HVR-Z7J/Z7U/Z7N/Z7E/Z7P/Z7C
3-17. FP-228 Flexible Board
2
FP-228 Flexible adhesive sheet
(DEW SENSOR)
FP-031 Flexible adhesive sheet
FP-228 Flexible adhesive sheet
FP-031 Flexible adhesive
sheet
1
Soldering at the
two locations
Soldering
Points to be noted
Use the rubber finger tip cover.
Lead-free solder
Wire type :
∅
0.6
Soldering iron : 941 made by Hakko Mfg.
Soldering iron tip : T1-1BC
Soldering iron tip temperature : 300
±
10
°
C
Soldering iron tip contacting time: within 2 sec.
Be careful not to create the hollow soldering,
bridge formation, and the holder's claw must not be melt.
Mechanism chassis
Soldering
1. Removal procedure
1) Remove soldering at two locations
1
on the FP-031 board
and the FP-228 flexible board, and remove the FP-228 flex-
ible board (DEW SENSOR)
2
from the mechanism chassis.
2. Attachment procedure
1) Attach the FP-228 flexible board (DEW SENSOR)
2
to the
mechanism chassis and attach the FP-031 board to the FP-228
board.
2) Solder the terminal block at two locations
1
on the FP-031
flexible board.