Sony Handycam DCR-PC6E, Руководство по обслуживанию

Страница: 125 / 175

5-24
11. Auto White Balance Adjustment
Adjust to the proper auto white balance output data.
If it is not correct, auto white balance and color reproducibility will
be poor.
Subject Clear chart
(Color reproduction adjustment
frame)
Filter Filter C14 for color temperature
correction
Measurement Point Display data of page 1 (Note3)
Measuring Instrument Adjustment remote commander
Adjustment Page F
Adjustment Address 40, 41
Specified Value R ratio: 2C50 to 2D50
B ratio: 5C00 to 5D00
Note1:
After the power is turned on, this adjustment can be done only
once.
Note2: Perform “Auto White Balance & LV Standard Data Input” before
this adjustment.
Note3: Displayed data of page 1 of the adjustment remote commander.
1 : XX : XX
Display data
Switch setting:
1)
POWER .................................................................. CAMERA
2) NIGHT SHOT .................................................................. OFF
3) DIGITAL ZOOM (Menu display) ................................... OFF
Adjusting method:
Order Page Address Data Procedure
1 Place the C14 filter for color
temperature correction on the
lens.
2 0 01 01 Set the data.
3 F 42 Write down the data.
4 F 42 2C Set the data, and press PAUSE
button.
5 F 43 Write down the data.
6 F 43 D0 Set the data, and press PAUSE
button.
7 F 44 Write down the data.
8 F 44 5C Set the data, and press PAUSE
button.
9 F 45 Write down the data.
10 F 45 80 Set the data, and press PAUSE
button.
11 6 01 83 Set the data, and press PAUSE
button.
12 6 01 81 Set the data, and press PAUSE
button.
13 6 02 Check that the data changes to
“01”. (Note4)
14 6 01 3F Set the data, and press PAUSE
button.
15 6 04 04 Set the data.
16 1 Check that the display data
(Note3) satisfies the R ratio
specified value.
17 6 04 05 Set the data.
18 1 Check that the display data
(Note3) satisfies the B ratio
specified value.
Note4:
The adjustment data will be automatically input to page: F, address:
40, 41.
Processing after Completing Adjustments:
Order Page Address Data Procedure
1 6 01 00 Set the data, and press PAUSE
button.
2 6 04 00 Set the data.
3 F 42 Set the data that is written down
at step 3, and press PAUSE
button.
4 F 43 Set the data that is written down
at step 5, and press PAUSE
button.
5 F 44 Set the data that is written down
at step 7, and press PAUSE
button.
6 F 45 Set the data that is written down
at step 9, and press PAUSE
button.
7 0 01 00 Set the data.
RadarW RadarW RadarW RadarW RadarW