Sony E-mount SEL200600G Скачать руководство пользователя страница 1

SERVICE MANUAL

Sony Imaging Products & Solutions Inc.

Conditions of Use:

(1)  Please use this information only for the purpose of performing repair, maintenance and/or confi guration services of the Sony products (hereinafter the “Repair services”) under the 

service agreement entered into with the Sony group company (hereinafter the “Service agreement”). Using this information for any purpose other than the purpose described foregoing 

is forbidden.

(2)  Only the Authorized Servicer’s offi  cers, employees or subcontractors (including their offi  cers and employees) whose duties justify a need-to-know and who have agreed to hold 

confi dential this information (collectively hereinafter the “Permitted users”) are permitted to access and use this information. To disclose or disseminate to any person other than the 

Permitted users is forbidden.

(3)  Destroy or erase any and all portion of this information promptly in an irrecoverable and secure fashion after achieving the purpose described in Section (1) above.

(4)  Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part without the prior written permission of the author.

 

(Notwithstanding foregoing, it is permitted to copy and distribute this information to the Permitted users.)

(5)  Please notify immediately any leakage, loss, theft, misappropriation, or other misuse of this information by e-mail to the following address:

 

 

[email protected]

(6)  In addition to the above, the terms and conditions of the Service agreement shall be applied to using this information.

Revision of Information:

This information may be changed or updated at any time without any prior notice. Please confi rm that this information is up-to-date before using it.

US Model

Canadian Model

AEP Model

Chinese Model

INTERCHANGEABLE LENS

© 

2019.06

2019F33-1

9-896-867-11

Ver. 1.0  2019.06

SEL200600G

(FE5.6-6.3/200-600 G OSS) (FE 200-600mm F5.6-6.3 G OSS)

E-mount

SPECIFICATIONS

Name (Model name)

FE 200-600mm 
F5.6-6.3 G OSS
(SEL200600G)

Focal length (mm)

200-600

35mm equivalent  
focal length*

1

 (mm)

300-900

Lens groups-elements

17-24

Angle of view 1*

2

12°30'-4°10'

Angle of view 2*

2

8°-2°40'

Minimum focus*

3

 (m (feet))

2.4 (7.88)

Maximum magnification (×)

0.2

Minimum aperture

F32-F36

Filter diameter (mm)

95

Dimensions  
(maximum diameter × height)  
(approx., mm (in.))

111.5×318
(4 1/2×12 5/8)

Mass (approx., g (oz.))  
(excluding tripod collar)

2,115 (74.7)

SteadyShot

Yes

For further information on compatibility with the 
tele converter (sold separately) and specifications 
used with the tele converter, visit the web site of 
Sony in your area, or consult your dealer of Sony or 
local authorized service facility of Sony.

*

1

  This is the equivalent focal length in 35mm format 

when mounted on an Interchangeable Lens Digital 
Camera equipped with an APS-C sized image sensor.

*

2

  Angle of view 1 is the value for 35mm cameras, and 

angle of view 2 is the value for Interchangeable Lens 
Digital Cameras equipped with an APS-C sized image 
sensor.

*

3

  Minimum focus is the distance from the image 

sensor to the subject.

• Depending on the lens mechanism, the focal length 

may change with any change in shooting distance. 
The focal lengths given above assume the lens is 
focused at infinity.

Included items 
(The number in parentheses indicates the number 
of pieces.)
Lens (1), Front lens cap (1), Rear lens cap (1), Tripod 
collar (1), Lens hood (1), Lens case (1), Lens strap (1), 
Set of printed documentation

Designs and specifications are subject to change 
without notice.

 and 

 are trademarks of Sony Corporation.

SYS SET

2019/06/28 22:04:56 (GMT+09:00)

Содержание E-mount SEL200600G

















































































































Отзывы: