Chapter 2
Location and Function of Parts
2-37
For details of the effect of controls
2
to
4
when the MENU or ORTHG button is
pressed and lit, see below.
Effect of controls
2
to
4
when the
MENU button is lit
2
Operating buttons
ASP SKEW PERS (M/E-1): Functions as
the M/E-1 button, allocated to M/E-1
operations on the DME control panel.
LOC SIZE (M/E-2): Functions as the M/
E-2 button, allocated to M/E-2
operations on the DME control panel.
LOC XYZ (M/E-3): Functions as the M/
E-3 button, allocated to M/E-3
operations on the DME control panel.
AXIS LOC (REV): When the ASP
SKEW PERS (M/E-1), LOC SIZE (M/
E-2) or LOC XYZ (M/E-3) button is
lit, functions as a REV (reverse) button
for wipe operations on the
corresponding bank. When this is
“ON”, wipe transitions occur in the
reverse direction. When it is “OFF”,
wipe transitions occur in the forward
(“normal”) direction.
ROT (POS): When the ASP SKEW PERS
(M/E-1), LOC SIZE (M/E-2) or LOC
XYZ (M/E-3) button is lit, toggles on
or off the main pattern wipe positioner
function on the corresponding bank.
X, Y, Z: The X and Y buttons enable
movement of the trackball in the x- and
y-directions. The Z button enables
operation of the Z-ring. If all three
buttons are off, the X, Y, and Z
directions are all enabled; that is, this is
the same as when all three buttons are
lit.
CLR WORK BUFR: Not used.
CTR (center): When the ASP SKEW
PERS (M/E-1), LOC SIZE (M/E-2) or
LOC XYZ (M/E-3) button is lit,
returns the wipe pattern to the default
position on the corresponding bank.
VELO HOLD (velocity hold): If you
hold down this button while
manipulating the trackball or Z-ring,
then when you release the trackball or
Z-ring the function continues at the
same velocity as long as the button is
held down.
ORTHG (when not used as a function
allocation button
1
): When this
button is lit, moving the trackball
produces an orthogonal effect, moving
only in whichever of the x- and y-
directions has the larger component.
3
Trackball
Horizontal movement (X) is allocated to
the control of knob 1, and vertical
movement (Y) to the control of knob 2.
When the ASP SKEW PERS (M/E-1),
LOC SIZE (M/E-2) or LOC XYZ (M/E-3)
button is lit, functions as the wipe
positioner on the corresponding bank.
4
Z-ring
Allocated to the control of knob 3. When
the auto chroma key sample mark
adjustment menu is displayed, this is used
to adjust the size of the sample mark.
Содержание DVS-7300
