Sony DVS-7300, Руководство пользователя

Страница: 511 / 606

Chapter 14 Setup
14-55
2
Press F1 (DEVICE SELECT) to move the cursor and select the switcher
(SWER) or DMK-7000 (DMK) as the device to which the settings apply.
The menu display changes according to the selection you make.
3
Press F2 (PORT SELECT) or turn control knob 2 to move the cursor and
select the required GPI output port of the device selected in step
2
.
4
Press F3 (TRIGGER TYPE), and select the trigger polarity.
Pressing F3 cycles the setting through , , , NOP, and TALLY.
If you selected TALLY, continue to step 6 .
5
Press F4 (PULSE WIDTH), then turn control knob 4 to adjust the output
pulse width.
6
Press F8 (ACTION SELECT) or turn control knob to move the cursor
and select the action causing the GPI output.
7
Press F6 (SELECT) to confirm the selection of the action causing the
GPI output.
The action you have selected appears in the row for the output port
selected in step
3 .
8
To make settings for more than one GPI output port, repeat steps
3
to
7
for each GPI output port.
9
To test the operation of a trigger, press F10 (TEST FIRE).
This outputs a trigger from the GPI output port selected in step 3 .