Sony DVS-7300, Руководство пользователя

Страница: 14 / 606

1-4
Chapter 1 Overview
System Configurations and Terminology
This manual refers to the principal components of the DVS-7300/7350 I/O
expansion system by the terms listed below.
Terms for system components
The following table lists the full model names of system components and the
terms used to identify them in this manual.
a) Unless it is necessary to distinguish “3.5-M/E panel” and “3-M/E panel” the term “control
panel” is used.
b) In a 3.5-M/E panel, the downstream keyer control section is built-in as standard.
Terms for system types
This manual also uses the terms listed below to distinguish different types of
system where necessary.
a) In the case of a system equipped with a DMK-7000 and BKDS-7032 DSK Control Panel Unit,
where required the term “3-M/E system equipped with a downstream keyer” is also used.
Full model name Term used in this manual
DVS-7000A Digital Video Switcher Switcher
BKDS-7021/7022/7023 TYPE-4D
Switcher Control Panel 3.5-M/E panel a)
BKDS-7011/7012 TYPE-3D Switcher
Control Panel 3-M/E panel a)
BZS-7021A Operation Software Software
DMK-7000 Digital Multi Keyer Downstream keyer
BKDS-7032 DSK Control Panel Unit Downstream keyer control section
b)
DME-7000 or other Digital Multi Effects
unit DME unit
DVS-V6464M, HDS-X3600
Digital Video Routing Switcher Routing switcher or I/O expansion unit
BKDS-7700 Tally Interface Unit Tally unit
System characteristics Term used
• Switcher system using a 3.5-M/E panel (BKDS-7021/7022/7023)
as the switcher control panel
• Switcher system with a DMK-7000 Digital Multi Keyer connected
DVS-7350 I/O
expansion system
or 3.5-M/E system
Switcher system using a 3-M/E panel (BKDS-7011/7012) as the
switcher control panel DVS-7300 I/O
expansion system
or 3-M/E system
a)
System equipped with an option board and with system settings to
support composite signal format D2 system
System equipped with an option board and with system settings to
support component signal format D1 system
Introduction