Sony DVS-7300, Руководство пользователя

Страница: 391 / 606

Chapter 9 Registers
9-17
Channel-to-Channel Copying of DME Registers
To copy DME registers from one channel to another, use the following
procedure.
1
In the REGISTER menu, select item 5 (CH COPY).
A menu for the channel-to-channel copy appears.
2
Depending on what you wish to copy, press one of F1 to F3, turning it on
(reverse video).
F1 (EFFECT): key frame effect registers
F2 (SNAPSHOT): snapshot registers
F3 (SETUP): currently used setup data
3
Press F4 (FROM CH), to select the source DME channel.
4
Press F6 (TO CH), to select the destination DME channel.
• If in step 2 you selected F1 (EFFECT) or F2 (SNAPSHOT), proceed to
step 5 .
• If in step
2
you selected F3 (SETUP), skip to step
8
.
5
Depending on how you wish to select the register or registers to be
copied, press one of F7 to F9.
F7 (ALL): Specify all registers.
F8 (BLOCK): Specify a block of registers.
F9 (ONE): Specify a single register.
• If you pressed F7 (ALL), skip to step
8
.
• If you pressed F8 (BLOCK) or F9 (ONE), the register number input
area switches to reverse video, and “FROM” and “TO” are displayed.
In this case proceed to step
6
.
6
Enter the source register number in the position to the right of “FROM”,
using the numeric keypad, then press the ENTER button.
If in step
5
you pressed the F8 (BLOCK) button, first enter the number of
the first register in the block (the reverse video area moves to the right of
the “—”, then enter the last register number.
(Continued)