Sony DMW-IF02, Руководство по обслуживанию

Страница: 72 / 126

2-8
DMW-S01NL/S02NL/ST001
DIMM
m
.
When replacing the DIMM, do not touch the terminal
portions of the DIMM and also perform the remedy for
static electricity using ESD wrist band etc., to prevent
not to damage the DIMM.
.
After replacing the DIMM, be sure to perform the
operation check, then perform the reassembling of each
parts.
Adjustment after replacement of the DIMM
.
After replacing the DIMM, perform the status check
using the BIOS setting menu. And also, make sure to
erasing the error information of the DIMM.
(Refer to “Sec. 5-1”.)
.
After replacing the DIMM, perform the operation check
using the utility software “I-Ciser”.
(Refer to “Sec. 5-2-1”.)
CPU
f) CPU
(1) Remove the AV I/O block. (Refer to “Sec. 2-1-2”.)
(2) Remove the PCI duct and CPU duct.
(Refer to “Sec. 2-1-3, 1, b) Cabinet Fan steps (2) and (4)”.)
(3) Remove the hook by pulling up the both side levers of
the CPU and remove it.
m
.
When replacing the CPU, do not touch the terminal
portions of CPU and also perform the remedy for static
electricity using ESD wrist band etc., to prevent not to
damage the CPU.
.
Confirm the CPU get cold, make sure to perform the
replacement working. (Wait for the several minutes after
turned off the power of the unit.)
.
After replacing the CPU, be sure to perform the
operation check, then perform the reassembling of each
parts.
Adjustment after replacement of the CPU
After replacing the CPU, confirm the CPU type and clock
speed using the BIOS setting menu. And also, make sure to
erasing the error information of the CPU.
(Refer to “Sec. 5-1”.)
g) DIMM
(1) Remove the AV I/O block. (Refer to “Sec. 2-1-2”.)
(2) Remove the PCI duct and CPU duct.
(Refer to “Sec. 2-1-3, 1, b) Cabinet Fan steps (2) and (4)”.)
(3) Remove the DIMM by pulling down the levers of the
DIMM socket.
2-1. Digital media workstation/A/V block