Sony DMW-IF02, Руководство по обслуживанию

Страница: 32 / 126

1-20
DMW-S01NL/S02NL/ST001
. MTS-11 board
S6001
D6001
CN151
S1003 S1004 S1103 S1104
S1001 S1002 S1101 S1102
D562
1-6. Switch and jumper-pin setting and LED functions
LED
D104 (green) : ST1
Indicate the process status in proportion to CPU load
D103 (green) : ST1
Indicate the process status in proportion to CPU load
D102 (green) : ST1
Indicate the process status in proportion to CPU load
D101 (green) : ST1
Indicate the process status in proportion to CPU load
D3605 (green) :
+
5 V CPU
+
5 power supply condition of CPU
Light on : Normalcy
Light off : Abnormal power supply voltage
or fuse F3604 (2.5 A) has blown.
D3602 (green) :
+
5 V
+
5 V power supply condition
Light on : Normalcy
Light off : Abnormal
+
5 V power supply voltage
or fuse F3601 (5 A) has blown.
D3603 (green) : + 3.3 V
+
3.3 V power supply condition
Light on : Normalcy
Light off : Abnormal
+
3.3 V power supply voltage
or fuse F3603 (5 A) has blown.
D3604 (green) :
+
2.5 V
+
2.5 V power supply condition
Light on : Normalcy
Light off : Abnormal
+
2.5 V power supply voltage
or fuse F3602 (5 A) has blown.
D2301 (green) : FPGA_CONF_DONE
Light up when program is down loaded in IC2401
D2302 (green) : VCO
Use VCO adjustment of IC2001, IC2002,
IC2601, IC2701, IC3001 and IC3202.
Light up : VCO free run frequency is within
the specification range.
Light off : VCO free run frequency is without
the specification range or out of
adjustment mode
Jumper-pin
COR241 : Use down loading the configuration
data for IC2301 (FPGA) to IC2401.
Factory setting : Open
*
COR242, COR243 : For monitoring HIF
.
3 Sound at DMW-S01NL
Factory setting
COR242, COR243 : Open
*
AUD_HARNES is connected at DMW-S02NL
Χ
OR244, COR245 : For SDI input/output expander
Factory setting
COR244, COR245 : Open
*
*
Open : Jumper socket un-insertion
Switch
S6001 (S6001-1 to S6001-4) : Not in used
Use the following factory setting
Factory setting
S6001-1 to -4 : OFF of all
S1001, S1002, S1101, S1102 : AUDIO IN (XLR 3P connector)
ON/OFF switch of 600
Z
termination for CH-1/ CH-2/
CH-3/ CH-4
Switch Corresponding channel
S1001 CH-1
S1002 CH-2
S1101 CH-3
S1102 CH-4
Factory setting
S1001, S1002, S1101, S1102 : OFF (600
Z
termination OFF)
S1003, S1004, S1103, S1104 : AUDIO IN (XLR 3P connector)
Input level (
+
16/
+
24 dBu) selector switch of CH-1/
CH-2/CH-3/CH-4
Switch Corresponding channel
S1003 CH-1
S1004 CH-2
S1103 CH-3
S1104 CH-4
Factory setting
S1003, S1004, S1103, S1104 :
+
24 dBu (Input level)