Sony DMW-IF02, Руководство по обслуживанию

Страница: 119 / 126

4-19
DMW-S01NL/S02NL/ST001
(10)ID Setting dialog will be displayed. Then, click the
“Address...” button.
Internet Mail Destination Setting dialog will be
displayed.
(11)Enter the
Alert Message destination (E-mail
address)
in the “To:” column.
Enter the information you want to add to the Alert
Message (machine ID, user name, information which
allows machine identification, etc.) in the “Message
Head” (Optional).
At this time, click the “Test” button.
Via the SMTP Server you have previously set, make
sure that you can send a mail to the “To:” address.
(12)Click the “OK” button to close the Internet Mail
Destination Setting dialog.
Close the ID Setting dialog as well.
3. When connecting to a modem
(1) When connecting through a modem, the modem must
be activated when an Alert occurs to allow connection
to the provider.
As shown in the below figure, check the “Enable”
check box of “Use Remote Access Service” to select a
modem setting you have set. Enter the ID and Pass-
word used for connection to the provider.
(2) Click Manager from the “Group” column of the
Destination Setting dialog, and click the “Modify
Group...” button.
The Group Setting dialog will be displayed.
4-4. Reinstallation