12 (E)
Menu Operation
When you press the MENU button on the display
panel, one of the following menu items appears in the
display window.
Hours Meter (Displayed items depend on the model.)
Console: Total time of power supply
I/O1 (
×
1000): Rotations of the upper IN/OUT port
(
×
1000 times)
I/O2 (
×
1000): Rotations of the lower IN/OUT port
(
×
1000 times)
JCT1 (
×
1000): Operations of the upper junction port
(
×
1000 times)
JCT2 (
×
1000): Operations of the lower junction port
(
×
1000 times)
Access (
×
1000): Movements of transfer (
×
1000 times)
X: Horizontal travel distance of a transfer (km)
Y: Vertical travel distance of a transfer (km)
H (
×
1000): Horizontal rotations of a transfer (
×
1000
times)
V (
×
1000): Vertical rotations of a transfer (
×
1000
times)
Brake (
×
1000): Iterations of releasing a brake of a
transfer (
×
1000 times)
Program Version
ROM version
Set Up
Date
Time
LCD Contrast
Auto Initial
Alarm Tone
Configuration
Current configuration of the system
b: Basic console (DMS-8800B/8400B)
D/d: Drive console (DMS-8800D/8400D)
C/c: Cassette console (DMS-8800C/8400C)
j: Junction console (DMS-8800J/8400J)
A capital letter indicates the console to which the
Junction console is connected
“*” is displayed at the top of the Configuration menu
as well the next to the end console.
Selecting an item to be displayed
Press one of the arrow buttons to select an item to be
displayed. If an arror button is lit, this indicates that
there is an item to be displayed. Press a lit arrow
button to dispaly the item.
Setting the items in Set Up menu
Items on the Set Up menu can be set using the
following procedures.
1
Press the MENU button to display a menu item in
the display window.
2
Press one of the arrow buttons to select the item in
the Set Up menu to be set.
3
Press one of the arrow buttons to display the set
value.
4
Press the ENTER button.
The value set in step
3
is registered.
Repeat steps
2
through
4
as required.
Retrieving the previous status
Press the ESC/CLR button.
Terminating the menu operation
Press the ESC/CLR button while the title of each menu
block such as Hours Meter, Program Version, Set Up
or Configuration is displayed on the display panel.
Operation
