background image

76

GB

You can enjoy sound effects or dialogue, as you 
would in a movie theatre, even at low volume. It 
is useful for watching movies at night.

Press NIGHT.

“NIGHT” lights up in the front panel display and 
the sound effect is activated.

Tip

• To enjoy more effects, set [AUDIO DRC] to 

[STANDARD] or [MAX] (page 88).

To turn off the sound effect

Press NIGHT again.

You can set the system to turn off at a preset 
time, so you can fall asleep listening to music. 
You can preset the time in 10 minutes 
decrements.

Press SLEEP.

Each time you press SLEEP, the minute display 
(the remaining time) changes in the front panel 
display as follows:

When you set the sleep timer, “SLEEP” lights 
up in the front panel display.

To check the remaining time

Press SLEEP once.

To change the remaining time

Press SLEEP repeatedly to select the desired 
time.

To cancel the sleep timer 
function

Press SLEEP repeatedly until “SLEEP OFF” 
appears in the front panel display.

Enjoying the Sound at Low 
Volume

(NIGHT MODE)

NIGHT

Using the Sleep Timer

SLEEP

SLEEP OFF 

t

 SLEEP 90M 

t

 SLEEP 80M

R

r

SLEEP 10M ..... SLEEP 60M 

T

 SLEEP 70M

Содержание DAV IS50 - Bravia Theater Home System
























































































































Отзывы: