Sony DAV IS50 - Bravia Theater Home System Скачать руководство пользователя

Страница: 99 / 119

Ad
dit
ion
al I

rmatio

Operation

The beginning of the sound is cut off.

• Set the Sound mode to other than “AUTO” (page 58).

• Set the decoding mode to other than “A.F.D. MULTI” (page 56).

Symptom

Remedy

Symptom

Remedy

Radio stations cannot be tuned in.

• Check that the antenna (aerial) is connected securely. Adjust the antenna

(aerial) or connect an external antenna (aerial) if necessary.

• The signal strength of the stations is too weak (when tuning in with

automatic tuning). Use direct tuning.

• No stations have been preset or the preset stations have been cleared

(when tuning by scanning preset stations). Preset the stations (page 60).

• Press DISPLAY so that the frequency appears in the front panel display.

The remote does not function.

• There are obstacles between the remote and the control unit.

• The distance between the remote and the control unit is too far.

• The remote is not pointed at the remote sensor on the control unit.

• The batteries in the remote are weak.

A disc does not play.

• There is no disc inserted.

• The disc is upside down.

Insert the disc with the playback side facing down.

• The system cannot play CD-ROMs, etc. (page 7).

• The region code on the DVD does not match the system.

• Moisture has condensed inside the control unit and may cause damage to

the lenses. Remove the disc and leave the control unit turned on for about
half an hour.

• The disc is not written properly.

• The disc is dirty or flawed.

The MP3 file cannot be played.

• The DATA CD is not recorded in an MP3 format that conforms to ISO

9660 Level 1/Level 2, or Joliet.

• The DATA DVD is not recorded in an MP3 format that conforms to UDF

(Universal Disk Format).

• The MP3 file does not have the extension “.MP3”.

• The data is not formatted in MP3 even though it has the extension

“.MP3”.

• The data is not MPEG 1 Audio Layer 3 data.

• The system cannot play audio tracks in MP3PRO format.

• The [MODE (MUSIC, IMAGE)] setting has been set to [IMAGE]

(page 52).

• If you cannot change the [MODE (MUSIC, IMAGE)] setting, re-load the

disc or turn the system off, then on.

• The DATA CD/DATA DVD contains a DivX video file.

continued

Содержание DAV IS50 - Bravia Theater Home System
























































































































Результаты поиска

Содержание DAV IS50 - Bravia Theater Home System

Отзывы:

Похожие инструкции для DAV IS50 - Bravia Theater Home System

Бренды по названию

Популярные бренды

Sony DAV IS50 - Bravia Theater Home System, Руководство по эксплуатации

Результаты поиска

Содержание DAV IS50 - Bravia Theater Home System

Отзывы:

Похожие инструкции для DAV IS50 - Bravia Theater Home System

Бренды по названию

Популярные бренды