92
GB
3
Press
X
/
x
to select [CUSTOM], then
press .
The Setup Display appears.
4
Press
X
/
x
repeatedly to select
[SPEAKER SETUP], then press
or
c
.
5
Press
X
/
x
repeatedly to select [TEST
TONE], then press
or
c
.
6
Press
X
/
x
repeatedly to select [ON],
then press
.
You will hear the test tone from each
speaker in sequence.
7
Press
C
/
X
/
x
/
c
to adjust the value of
[LEVEL (FRONT)] or [LEVEL
(SURROUND)].
The test tone is emitted from only the
speaker which you are adjusting.
8
Press
when you have finished
making adjustments.
9
Press
X
/
x
repeatedly to select [TEST
TONE], then press
.
10
Press
X
/
x
repeatedly to select [OFF],
then press
.
Note
• The test tone signals are not output from the HDMI
OUT jack.
Tip
• To adjust the volume of all the speakers at one time,
press /–.
• To return to the default setting when changing a
setting, select the item, then press CLEAR. Note that
only the [CONNECTION] setting does not return to
the default setting.
Returning the system
parameters, such as preset
stations, to the default
settings
1
Turn off the power.
2
Press and hold
"
/
1
on the control unit
about 5 seconds.
“MEMORY CLR” and “PUSH POWER”
appear alternately in the front panel display
about 10 seconds.
3
Press
"
/
1
.
“CLEARING” appears in the front panel
display and the default settings are returned.
After “CLEARED!” appears, the system is
turned off.
Note
• In step 3, if you do not press
"
/
1
or press any buttons
other than
"
/
1
on the control unit, the system turns
on. The setting is not made.
• When you turn on the system after returning to the
default settings, wait about 20 seconds before turning
on the power by pressing
"
/
1
.
Returning to the Default
Settings
"
/
1
