Sony D8 Digital Handycam DCR-TRV820E, Руководство по обслуживанию, Страница: 33 / 233

1-22
92
Changing the menu settings
Icon/item
CONTINUOUS
QUALITY
FLD./FRAME
PRINT MARK
PROTECT
SLIDE SHOW
DELETE ALL
FORMAT
PHOTO SAVE
Mode
z
OFF
MULTI SCRN
z
FINE
STANDARD
z
FIELD
FRAME
z
OFF
ON
z
OFF
ON
———
———
z
RETURN
FORMAT
———
Meaning
Not to record continuously
To record 9 images continuously (p. 111)
To record still images in the fine image quality mode,
using the “Memory Stick”
To record still images in the standard image quality
mode, using the “Memory Stick”
To record moving subjects
To record stopping subjects in high quality
To cancel print marks on still images
To write a print mark on the recorded still images
you want to print out later
Not to protect still images
To protect selected still iamges against accidental
erasure (p. 133)
To play back images in a continuous loop (p. 131)
To delete all the images (p. 136)
To cancel formatting.
To format an inserted “Memory Stick.”
1. Select FORMAT with the SEL/PUSH EXEC dial,
then press the dial.
2. Turn the SEL/PUSH EXEC dial to select FORMAT,
then press the dial.
3. After EXECUTE appears, press the SEL/PUSH
EXEC dial. FORMATTING appears during
formatting. COMPLETE appears when formatting is
finished.
To duplicate still images (p. 122)
POWER
switch
MEMORY
VTR
MEMORY
MEMORY
VTR
MEMORY
VTR
MEMORY
MEMORY
VTR
MEMORY
VTR
MEMORY
VTR
Note on print marks
You can print images with the printer on your camcorder including images without print marks.
(DCR-TRV820E only)
Notes on formatting
•Supplied or optional “Memory Stick”s have been formatted at factory. Formatting with this
camcorder is not required.
•Do not turn the POWER switch or press any button while the display shows FORMATTING.
•You cannot format the “Memory Stick” if the write-protect tab on the “Memory Stick” is set to LOCK.
•Format again if the message
appears.
Formatting erases all information on the “Memory Stick”
Check the contents of the “Memory Stick” before formatting.
•Formatting erases sample images on the “Memory Stick.”
•Formatting erases the protected image data on the “Memory Stick.”
93
Customizing Your Camcorder
Выполнение индивидуальных установок на видеокамере
Changing the menu settings
Icon/item
9PIC SAME*
9PIC MULTI*
REC MODE
AUDIO MODE
q
REMAIN
DATA CODE
Mode
———
———
z
SP
LP
z
12BIT
16BIT
z
AUTO
ON
z
DATE/CAM
DATE
Meaning
To make prints of same split screen
To make prints of different split screen
To record in the SP (Standard Play) mode
To increase the recording time to 1.5 times the SP
mode
To record or play back in the 12-bit mode (two stereo
sounds)
To record or play back in the 16-bit mode (the one
stereo sound with high quality)
To display the remaining tape bar:
• for about 8 seconds after your camcorder is turned
on and calculates the remaining amount of tape
• for about 8 seconds after a cassette is inserted and
your camcorder calculates the remaining amount of
tape
• for about 8 seconds after
N
is pressed in VTR
mode
• for about 8 seconds after DISPLAY is pressed to
display the screen indicators
• for the period of tape rewinding, forwarding or
picture search in the VTR mode
To always display the remaining tape bar
To display date, time and recording data during
playback
To display date and time during playback
POWER
switch
VTR
MEMORY
VTR
MEMORY
VTR
CAMERA
VTR **
CAMERA
VTR
CAMERA
VTR
* DCR-TRV820E only
Note on REC MODE
When you record on the standard 8 tape, your camcorder records in the SP mode even you select the
LP mode in the menu settings. In this case, the indicator “8 mm TAPE
t
SP REC, Hi8 TAPE
t
LP/
SP REC” appears on the LCD screen or in the viewfinder. Use the Hi8 tapes for the LP mode.
Notes on the LP mode
•When you record a tape in the LP mode on your camcorder, we recommend playing the tape on your
camcorder. When you play back the tape on other camcorders or VCRs, noise may occur in images or
sound.
•When you record in the SP and LP modes on one tape or you record some scenes in the LP mode, the
playback image may be distorted or the time code may not be written properly between scenes.
Note on AUDIO MODE
When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance in AUDIO MIX.
**To dub a tape to another VCR
You cannot select AUDIO MODE for tapes recorded in the Digital8 system. You, however, can select
AUDIO MODE when you dub tapes recorded in the Hi8/standard 8 system to another VCR using the
i.LINK cable.
94
Changing the menu settings
Icon/item
CLOCK SET
LTR SIZE
DEMO MODE
Mode
———
z
NORMAL
2
×
z
ON
OFF
Meaning
To reset the date or time (p. 103)
To display selected menu items in normal size
To display selected menu items at twice the normal
size
To make the demonstration appear
To cancel the demonstration mode
POWER
switch
CAMERA
MEMORY
CAMERA
Notes on DEMO MODE
•You cannot select DEMO MODE when a cassette is inserted in your camcorder.
•DEMO MODE is set to STBY (Standby) at the factory and the demonstration starts about 10 minutes
after you have set the POWER switch to CAMERA without a cassette inserted.
To cancel the demonstration, insert a cassette, set the POWER switch to other than CAMERA, or set
DEMO MODE to OFF.
•When NIGHTSHOT is set to ON, the “NIGHTSHOT” indicator appears on the LCD screen or in the
viewfinder and you cannot select DEMO MODE in the menu settings.
VTR
CAMERA
MEMORY
95
Customizing Your Camcorder
Выполнение индивидуальных установок на видеокамере
Changing the menu settings
Icon/item
WORLD TIME
BEEP
COMMANDER
DISPLAY
REC LAMP
INDICATOR
Mode
———
z
MELODY
NORMAL
OFF
z
ON
OFF
z
LCD
V-OUT/LCD
z
ON
OFF
z
BL OFF
BL ON
Meaning
To set the clock to the local time.
Turn the SEL/PUSH EXEC dial to set a time
difference. The clock changes by the time difference
you set here. If you set the time difference to 0, the
clock returns to the originally set time.
To output the melody when you start/stop recording
or when an unusual condition occurs on your
camcorder
To output the beep instead of the melody
To cancel all sound including shutter sound
To activate the Remote Commander supplied with
your camcorder
To deactivate the Remote Commander to avoid
remote control misoperation caused by other VCR’s
remote control
To show the display on the LCD screen and in the
viewfinder
To show the display on the TV screen, LCD screen
and in the viewfinder
To light up the camera recording lamp at the front of
your camcorder
To turn the camera recording lamp off so that the
subject is not aware of the recording
To turn off the backlight on display window
To turn on the backlight
POWER
switch
CAMERA
MEMORY
VTR
CAMERA
MEMORY
VTR
CAMERA
MEMORY
CAMERA
MEMORY
VTR
CAMERA
MEMORY
Note
If you press DISPLAY with DISPLAY set to V-OUT/LCD in the menu settings, the picture from a TV
or VCR will not appear on the LCD screen even when your camcorder is connected to outputs on the
TV or VCR. (Except when your camcorder is connected with the i.LINK cable.)
In more than 5 minutes after removing the power source
The AUDIO MIX, COMMANDER and HiFi SOUND items are returned to their default settings.
The other menu items are held in memory even when the battery is removed, as long as the lithium
battery is installed.
Notes on INDICATOR
•When you select BL ON, battery life is reduced by about 10 percent during recording.
•When you use power sources other than the battery pack, BL ON is automatically selected.
VTR
CAMERA
MEMORY