Sony D8 Digital Handycam DCR-TRV820E Скачать руководство пользователя страница 151

Страница: 151 / 233

5-22

Switch setting:
1) NIGHT SHOT .................................................................. OFF
2) DIGITAL ZOOM (Menu display) ................................... OFF
3) STEADY SHOT (Menu display) .................................... OFF

Adjusting method:
1) Place the C14 filter for color temperature correction on the

lens.

2) Select page: 0, address: 01, and set data: 01.
3) Select page: 6, address: 82, and set data: 01.
4) Select page: F, addresses: B8 to BB, and note down the data of

each address.

5) Input the following data to page: F, addresses: B8 to BB.

Note:

Press the PAUSE button of the adjustment remote com-
mander each time to set the data.

6) Select page: 6, address: 01, set data: A7, and press the PAUSE

button.

7) Wait for 2 seconds.
8) Select page: 6, address: 01, set data: A5, and press the PAUSE

button.

(The auto white balance adjustment is performed and the ad-

justment data is stored in page: F, address: 42 and 43)

9) Select page: 6, address: 02, and check that the data is “01”.
10) Select page: 6, address: 01, set data: 3F, and press the PAUSE

button.

11) Select page: 0, address: 03, and set data: 04.
12) Select page: 1, and check that the display data (Note2) satis-

fies the R ratio specified value.

13) Select page: 0, address: 03, and set data: 05.
14) Select page: 1, and check that the display data (Note2) satis-

fies the B ratio specified value.

15) Select page: F, addresses: B8 to BB, and input the data noted

down at step 3).

Note:

After setting each data, be sure to press the PAUSE
button of the adjustment remote commander.

Processing after Completing Adjustments
1) Select page: 6, address: 01, set data: 00, and press the PAUSE

button.

2) Select page: 6, address: 82, and set data: 00.
3) Select page: 0, address: 03, and set data: 00.
4) Select page: 0, address: 01, and set data: 00.

8. AWB & LV Standard Data Input

Subject

Clear chart (PTB-450)
(Color reproduction adjustment
frame)

Adjustment Page

Adjustment Address

3C to 41

Note 1:

This adjustment should be carried out upon completion
of “Color Reproduction Adjustment”.

Note 2:

Check that the data of page: 6, address: 02 is “00”. If not,
turn the power of the unit OFF/ON.

Adjusting method:
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 6, address: 82, and set data: 01.
3) Wait for 2 seconds.
4) Select page: 6, address: 01, set data: 11, and press the PAUSE

button of the adjustment remote commander.

5) Select page: 6, address: 01, set data: 0D, and press the PAUSE

button.
(When the standard data is take in, the data will be automati-
cally input to page: F, address: 3C to 41)

6) Select page: 6, address: 02, and check that the data is “01”.

Processing after Completing Adjustments
1) Select page: 6, address: 01, set data: 00, and press the PAUSE

button of the adjustment remote commander.

2) Select page: 6, address: 82, and set data: 00.
3) Select page: 0, address: 01, and set data: 00.
4) Perform “Auto White Balance Adjustment”.

9. Auto White Balance Adjustment

Adjust to the proper auto white balance output data.
If it is not correct, auto white balance and color reproducibility
will be poor.

Subject

Clear chart (PTB-450)
(Color reproduction adjustment frame)

Filter