29
S
hoot
ing st
ill
i
m
a
g
es
Selecting a flash mode
,
Set the mode switch to
, and
press
v
( ) on the control
button repeatedly to select a
flash mode.
Each time you press
v
( ), the indicator
changes as follows.
No indicator (Auto):
The flash
automatically strobes when shooting
images in a dark place. The factory setting
is Auto.
(Forced flash):
The flash strobes
regardless of the surrounding brightness.
(Slow synchro):
The flash strobes
regardless of the surrounding brightness.
The shutter speed is slow in a dark place, so
you can clearly shoot the background that is
out of flash light.
(No flash):
The flash does not strobe
regardless of the surrounding brightness.
•
If the menu is currently displayed, press MENU
first so that the menu disappears.
•
When [ISO] is set to [Auto] in the menu, the
recommended shooting distance using the flash
is approx. 0.3 m to 1.5 m (11 7/8 inches to
59 1/8 inches) (W)/0.5 m to 1.5 m (19 3/4
inches to 59 1/8 inches) (T).
•
You can change the brightness of the flash with
(Flash Level) in the menu (page 55). (You
cannot change the brightness of the flash while
(Camera) is set to [Auto] in the menu.)
•
When using the
(Slow synchro) or
(No
flash) mode, the shutter speed becomes slower
in dark places. Be careful not to allow your
hand to shake while holding the camera.
•
While charging the flash, the /CHG lamp
flashes. After the charging is complete, the
lamp goes out.
•
This setting is maintained even when the power
is turned off.
To prevent subjects’ eyes from
appearing red
Set [Red Eye Reduction] to [On] on the
Setup screen (page 114). The
indicator
appears on the LCD screen, and the flash
pre-strobes before shooting to reduce the
red-eye phenomenon.
•
Red-eye reduction may not produce the desired
effects depending on individual differences, the
distance to the subject, if the subject does not
see the pre-strobe, or other conditions.
60min
VGA
101
96
S AF
SL
SL
m
Содержание Cyber-Shot DSC-T11
Страница 5: ...5 ...
