97
Tr
oub
le
s
hoot
in
g
The LCD screen turns
blue and the subject does
not appear when
recording movies.
• The image size is set to [640(Fine)] while an A/
V connecting cable is connected to the A/V OUT
(MONO) jack.
p
Disconnect the A/V connecting cable.
p
Set the image size to other than [640(Fine)].
The image is out of focus.
• The subject is too close.
• When shooting still images,
(Camera) in the
menu is set to
(Magnifying glass mode),
(Twilight mode),
(Landscape mode) or
(Fireworks mode).
• The focus preset function is selected.
p
Use close-up (Macro) function and set the lens position father
away from the subject than the shortest shooting distance
(page 27). Or, set
(Camera) in the menu to
(Magnifying glass mode) and focus within the range of 1 cm to
20 cm (13/32 inch to 7 7/8 inches) from the subject (page 32).
p
Set it to other settings (page 32).
p
Cancel the function (page 49).
Zoom does not function.
• You cannot change the zoom scale when
shooting movies.
—
Optical zoom does not
function.
• When shooting still images,
(Camera) in the
menu is set to
(Magnifying glass mode).
p
Set it to other settings (page 32).
Digital zoom does not
function.
• [Digital Zoom] is set to [Off] on the Setup
screen.
• The image size is set to [5M] or [3:2] (only when
using the smart zoom).
• You are shooting in Multi Burst mode (only
when using the smart zoom).
p
Set [Digital Zoom] to [Smart] or [Precision] (pages 44 and 114).
p
Set image size to other settings except [5M] and [3:2] (page 20).
p
Set [Digital Zoom] to [Precision] (pages 44 and 114).
The image is too dark.
• You are shooting a subject with a light source
behind the subject.
• The brightness of the LCD screen is too low.
• The LCD backlight is turned off.
p
Adjust the exposure (page 50).
p
Adjust the brightness of the LCD screen (pages 44 and 115).
p
Turn on the LCD backlight with
The image is too bright.
• You are shooting a spotlighted subject in a dark
location such as on a stage.
• The brightness of the LCD screen is too bright.
p
Adjust the exposure (page 50).
p
Adjust the brightness of the LCD screen (pages 44 and 115).
Vertical streaks appear
when you are shooting a
very bright subject.
• The smear phenomenon is occurring.
p
This is not a malfunction.
Symptom
Cause
Solution
Содержание Cyber-Shot DSC-T11
Страница 5: ...5 ...
