Important
Read this manual carefully and become familiar with the specifications and operation of the
REFCO DIGIMON digital manifold prior to use. The instructions will give you important
information in regards to the operation and service of the manifold.
Purpose and use
The manifold has been designed specifically to measure pressure and temperature in refrigeration equip-
ment. The manifold may only be used by trained technicians.
The manifold
must not be used
for other than refrigerant applications. The manifold is not suit
able for other liquids or gases except those indicated on the display.
The manifold
must not be used
with pressure higher than 55bar / 800psi / 5500kPa / 5.5MPa.
The manifold
can not be used
as a pressure regulator.
The manifold
can not be used
with ammonia (NH3 / R717) and carbon dioxide (CO2 / R744)
Safety glasses and gloves
must be worn
during the use of the manifold
English
MedIaWorks • Box 104 • 288 22 VInslöV • sWeden • Tel. +46 44 70050 • Fax. +46 44 81200 • [email protected] • WWW.MedIa-Works.se
1
3
4
5
2
1
