12(E)
1
NO MAGAZINE indicators
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
1
2
3
4
5
6
OPEN
OPEN
NO
MAGAZINE
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
IN
OUT
7
8
9
10
11
12
NO
MAGAZINE
2
IN/OUT indicators
4
OPEN buttons
3
Function buttons
IN/OUT Ports
1
NO MAGAZINE indicators
Light in red if no magazines is loaded.
2
IN/OUT indicators
These indicators show the status of each cartridge slot.
IN indicator lit: A cartridge is loaded in the slot.
OUT indicator lit: A cartridge is being removed
from the drive.
IN and OUT indicators lit: The bar code on a
cartridge is being read. In some operating modes,
a cartridge may be pulled in before the indicators
are lit.
IN and OUT indicators blinking: No barcode label
is attached to the cartridge or the label cannot be
read.
3
Function buttons
The functions of these buttons are set using software.
4
OPEN buttons
To load or remove a cartridge via the ports, press the
buttons to open the doors. When the buttons are
pressed, they light and remain lit until the ports are
closed.
Depending on the operating condition of the system,
some time may be required until the doors open.
When an error is generated, the lamps of the buttons
flash.
PetaSite Control Unit (PCU)
The unit controls and monitors the drives and robot
block.
It also functions as the application server for PetaServe
and PetaBack.
Power switch
Turn the power of the unit on and off.
UID
NIC
1
NIC
2
Power switch
Locations and Functions of Parts
