Sony CMT-SP55MD Скачать руководство пользователя страница 55

Страница: 55 / 72

Timer/Other Features

Tips

• The system automatically turns on about 30 seconds

before the start time and prepares for timer-
recording. Recording starts as soon as the system is
ready, so recording may start earlier than the preset
time.

• When you record from the radio, the station name

(see page 49, or frequency when the station is not
labelled), the start time and the stop time are
automatically recorded on the MD.

Notes

• You cannot activate Daily Timer and the recording

timer at the same time.

• Do not operate the system from the time the system

turns on until the recording starts (about 30 seconds
before the preset time).

• If the system is on about 30 seconds before the

preset time, the timer-recording will not be
activated.

• The Smart Space and Level Synchro Recording

functions do not operate.

• The volume is reduced to minimum during

recording.

When you press ENTER/YES, the start time,
stop time and other setting contents appear in
turn, then the original display returns.

“REC” lights up.

Note

You cannot activate another tape deck (except
for the optional tape deck TC-SP55) with this
system’s recording timer.

Insert a recordable MD or tape.

If you use a partially recorded MD, recording
starts after the recorded tracks.

Press

?/1

to turn off the system.

To cancel the procedure

Press CLOCK/TIMER SET.

To change the setting

Start over from step 1.

To check the setting/activate
the timer

Press CLOCK/TIMER SELECT and press

repeatedly until “SEL MD REC” (or “SEL

TAPE REC” when using the optional tape deck
TC-SP55) appears.
Then press ENTER/YES.
It is not necessary to set the start and stop times
every time.

To cancel the timer

Press CLOCK/TIMER SELECT and press

repeatedly until “TIMER OFF” appears.

Then press ENTER/YES.

Содержание CMT-SP55MD









































































Результаты поиска

Содержание CMT-SP55MD

Отзывы:

Похожие инструкции для CMT-SP55MD

Бренды по названию

Популярные бренды

Sony CMT-SP55MD, Руководство по эксплуатации

Результаты поиска

Содержание CMT-SP55MD

Отзывы:

Похожие инструкции для CMT-SP55MD

Бренды по названию

Популярные бренды