1-15(E)
CA-702
CA-702P
1-8-5. PS-501 Board Replacement
1.
Open the outside panel.
2.
Disconnect the harness connected to connector CN26 on the PS-501 board.
3.
Remove the inside panel. (Refer to Section 1-8-1.)
4.
Remove the four plug-in boards.
5.
Remove the PWB guide(lower).
6.
Disconnect the harness connected to connectors CN22 through CN25 on the PS-501 board.
7.
Remove the two screws.
CN26 on the
PS-501 board
B3
x
8
B3
x
8
B3
x
8
Outside panel
CN22
CN23
CN24
CN25
PS-501 board
PWD guide (lower)
P2.6
x
6
1-8. Replacement of Main Parts