1-7(E)
CA-702
CA-702P
1-5. Setting of Switches on Board
S102-5 (Special operation enabled)
ON:
The VBS pool feed operation enters the special operation state below when the power is turned on
to enter the input mode while pressing the RET and REC switches with the COMPOSITE/SDI
terminal set to COMPOSITE.
Operation outline)
This operation is used for recording signals that a camcorder cannot gen-lock. The signal
source is externally synchronized by inputting the TEST OUT (or VIDEO OUT) signal from a
camcorder.
Operation specifications)
A CAM image is output to the TEST OUT and VIDEO OUT terminals of a camcorder.
The VBS signal input from pin 40 can be output to the viewfinder so as to monitor an input
signal.
OFF: Not enter the special operation state.
Factory setting: OFF
S102-6: Unused.
Factory setting: OFF
S102-7: Unused.
Factory setting: OFF
S102-8: Factory use
Factory setting: OFF
AD-150/P board
S1: AGC
ON:
The AGC (automatic gain control) of a Y signal is
turned on during VBS pool feeding.
OFF: AGC OFF
Factory setting: ON
DIF-67 board
S1-1: TEST ON/OFF
Factory use. Fixed to OFF.
S1-2: MODE
Factory use. Fixed to OFF.
S1-3: ENC VCO ADJ
OFF: Used during normal operation.
ON:
The internal VCO of an SDI encoder (CXD1341R) is
set to the free-running state.
Factory setting: OFF
S1-4: DEC VCO ADJ
OFF: Used during normal operation.
ON:
The internal VCO of an SDI decoder (CXD1342R) is set to the free-running state.
Factory setting: OFF
A
B
C
D
E
1
2
3
AD-150 BOARD (A SIDE)
CN1
E2
FL1
FL2
FL3
FL4
FL5
FL6
FL7
FL8
RV1
RV2
RV3
RV4
RV5
RV6
RV7
RV8
RV9
RV10
RV11
RV12
S1
TP1
TP2
TP4
TP5
TP6
CN1
D2
D3
E1
E2
TP7
RV3
RV1
RV2
S1
TP1
TP2
TP3
TP4
TP102
TP5
4
3
2
1
A
B
C
D
E
F
G
DIF-67 BOARD (A SIDE)