2-1 (E)
CA-702
CA-702P
Section 2
Electrical Alignment
2-1. Preparation
2-1-1. Equipment Required
Fixture:
Extension board EX-627 (Sony P/N : A-8317-716-A, Option)
Measuring Equipment:
.
Frequency counter:
Advantest TR5821AK or equivalent
.
Oscilloscope:
Tektronix 2465B or equivalent
.
Waveform monitor/Vectorscope:
Tektronix 1780R or equivalent (for NTSC)
Tektronix 1781R or equivalent (for PAL)
.
Digital voltmeter:
Advantest TR6450 or equivalent
.
Video signal generator: Tektronix TSG130 or equivalent (for NTSC)
Tektronix TSG131 or equivalent (for PAL)
Peripheral Equipment:
.
Camcorder:
DNW-7/7P series
.
AC adaptor:
AC-550/550CE or AC-DN1
2-1-2. Notes on Adjustments
.
All measuring equipment shall be calibrated.
.
The alignment for DNW-7/7P series shall be completed.
.
To adjust each plug-in board, extend using the extension board.
.
The waveforms differ according to the specifications (TV standard and encoded level) of a camera
connected to the unit during adjustment.
In this manual, every waveform corresponding to the specifications is given.