1-12(E)
CA-702
CA-702P
1-8-2. 40-pin Connector Replacement
1.
Remove the two (
_
)stepped screws and then remove the sheet(40P).
2.
Remove the six screws and remove the 40-pin bracket.
3.
Disconnect the 40-pin connector connected to connectors CN1 and CN2 on the HN-252 board.
4.
Attach a new 40-pin connector in the reverse order of removal steps.
5.
Check that the 40-pin connector is free to move by hand.
n
Do not reuse the disconnected 40-pin connector.
Stepped screws
M2.6
x
6
40-pin bracket
M2.6
x
6
M2
x
4.5
Sheet(40P)
40-pin connector
CN2
CN1
HN-252 board
40-pin connector
1-8. Replacement of Main Parts