Sony BVP-570, Руководство по обслуживанию

Страница: 800 / 806

2-4 (E)
BVP-570/550/500
(Waveform monitor)
OK NG
NG (VBS OUT)
(Monitor screen)
Halogen
lamp
(Monitor screen)
Vertical
overflow
6. Shoot a highlight object (halogen lamp, etc.), and
check to see that there is no vertical overflow under-
neath the light object on the monitor screen. If the
vertical overflow is visibly shown on the monitor
screen, go back to step 3, then readjust V sub [G] until
the specification 2 is met.
7. R/G/B switch (on the side panel)
→
R
8. Make sure that there is no vertical overflow in the Red
channel (R-ch). If the vertical overflow is visibly
shown, go back to step 3, then readjust V sub [R] until
the specification 2 is met.
File Store
:
When the factory adjusted V sub value has been changed,
be sure to execute the OHB file store.
Set the menu follows.
MENU : Trimming File
PAGE : OHB File (T2)
ITEM : File Store
(Press MENU SEL switch to execute the file store.)
2-1. BVP-570 and Upgraded BVP-550/550P with BKP-5090
2-1-2. V Substrate Voltage/V Reset Gate Adjustment
Resetting after Adjustment
:
.
Set the menu follows.
MENU : Paint
PAGE : Detail 1 (P2)
ITEM : Detail
→
On
MENU : Paint
PAGE : Gamma (P5)
ITEM : Gamma
→
On
MENU : Paint
PAGE : Gamma (P9)
ITEM : Shutter
→
On
MENU : Paint
PAGE : Gamma (P9)
ITEM : ESC
→
On