Sony BVP-570, Руководство по обслуживанию

Страница: 576 / 806

3-6 (E)
BVP-570
Page Ver. Item Settings Contents
Auto Auto Black Press MENU SEL Starts to automatically adjust the black balance.
Setup switch to execute. (To abort a processing during execution, press MENU SEL switch.)
Auto White Press MENU SEL Starts to automatically adjust the white balance.
switch to execute.
Auto Level Press MENU SEL Starts to automatically adjust the level in the internal circuits.
c)
switch to execute. (To abort a processing during execution, press MENU SEL switch.)
Test 1, 2,
[Off]
Selects the test signal.
1
: Outputs the sawtooth waveform test signal
2 : Outputs 3-step waveform test signal
Off : No test signal is output.
Diagnosis (For details, refer to Section 3-2.)
Camera ID No 1 to 96 (
[X]
) Sets a camera number in the range of 1 to 96.
(When no camera number is set, “- -” is displayed.)
ID:
[] [] [] [] [] [] []
Sets a camera ID of up to ten alphanumerics, symbols, and spaces.
No. / ID On Bars CAM No., CAM ID, Selects whether the camera number or ID is mixed with a camera
[Off]
output signal only in the color-bar mode, or not.
(This setting is valid only when the DISP switch is set to ON or OFF.)
Lens File Center H POS
_
20 to 20 (
[XX]
) Shifts horizontally the location of the center marker on the screen.
20 (right)
↔
_
20 (left)
Center V POS _ 20 to 20 (
[XX]
) Shifts vertically the location of the center marker on the screen.
20 (up)
↔
_ 20 (down)
Center POS Press MENU SEL Stores the location of the center marker at present in the selected lens
Store switch to execute. file number.
No.
[0]
to 15 Selects a lens file. d)
(Example) No. : 1
←
Lens file number (0 to15)
Lens : 25 : A8.5
x
5.5
←
Lens name
EX : 1.0
←
Lens extender value
c) When executing the Auto level, data set through the menu is all cleared and the automatic level adjustment is performed in
sequence, After the adjustment is complete, adjustment result is stored as a master setup data.
1. A reference file which is reference for adjustment is loaded .
2. Lens is autmatically closed and the black balance is automatically adjusted.
3. The white balance is automatically adjust using Test 2 (3-step) signal.
m
This white balance adjustment compensates a drift of the gain of an amplifier, does not compensate color temperature for an actual
object.
The gamma and knee compensation values do not change with a lapse of time because of the digital-processing camera.
Therefore, the gamma and knee compensation values remains the values stored in the reference file.
d) Select a lens file appropriate for the mounted lens from 16 kinds of the lens files which are stored in the RAM IC26/AT-126 board.
An additional data such as a center marker is also stored in the selected lens file.
3-1. Setup Menu
3-1-1. Operation Menu