Sony BVP-570, Руководство по обслуживанию

Страница: 65 / 806

3-19 (E)
BVP-570
Page Ver. Item Settings Contents
Others2 F Tally RVS
[On]
, Off Selects the operation mode of TALLY lamps corresponding to a CALL
button of MSU or RCP pressed when a TALLY signal is input to the
camera from CCU or VTR.
On
: Rear and front TALLY lamps go out.
Off : Rear TALLY lamp alone goes out.
CHAR CAM No.
[1,2,3]
, A,B,C Selects the indication mode of the camera number set by the CAMERA
ID. page of Operation menu.
1, 2, 3 : Indicates in numerics.
A, B, C: Indicates camera numbers 1 to 27 in alphabetical order of A to Z.
(When connecting 28 or more cameras, select “1,2,3”.)
WHT Setup
[AWB]
, LEVEL AWB : After executing the Auto Level, white balance adjustment
Mode data returns to the value before execution.
LEVEL: After executing the Auto Level, white balance adjustment
data changes to the value after the white balance is adjusted
using Test 2 signal.
AW Shading
[RGB]
, RB Only RGB : When automatically adjusting the white balance, R, G, and
Mode B signal waveforms are all flattened.
RB Only : When automatically adjusting the white balance, R and B
signal waveforms are flattened.
Talk Priority
[Talk|1]
, Talk 2 Selects the channel for which the VTR S/S switch of the lens turns on/
off the intercom microphone when the optional 2-channel intercom
function of the CA-550/550P is effective and both channel 1 and 2 are
in remote mode.
Canon U-4 On,
[Off]
Nomally Off. Set to On only when using the BVP-570 in the Canon-
Mode made U-4 system.
W Gain On,
[Off]
Turn the function on and off to select up to 36 dB master gain for each
gain switch position (LOW, MIDDLE, HIGH)
(This function is sometimes not activated depending on the type of OHB
which is incorporated in the camera.)
Sensitivity
[0]
, 6 dB 0: Normal mode
6: Select only when the gain is raised by 6 dB on the spot
3-1. Setup Menu
3-1-6. System Config Menu