Sony BVP-570, Руководство по обслуживанию

Страница: 27 / 806

2-3 (E)
BVP-570
2-1. Note on Service
4. Loading data from the EEPROM
(1) Set the switches S1-1 to S1-4 on the AT-126 board as follows:
S1-1 S1-2 S1-3 S1-4
OFF ON OFF ON
(2) Power on the unit while pressing the CANCEL button.
(3) Continue to press the CANCEL button until the message “Paint Clear” is displayed on the viewfinder
screen.
(4) Reset the switches S1-1 to S1-4 on the AT-126 board.
5. Executing the black auto setup
Set the AUTO W/B BAL switch on the camera front panel to BLK.
6. Executing the level auto setup
MENU : Operation
PAGE : Auto Setup (?8)
ITEM : Auto Level
(Press the MENU SELECT switch to ENTER to execute.)
2-1-5. Notes on Spare Parts
1. Standardization of Parts
Some repair parts supplied by Sony differ from those used for the unit. These are because of parts com-
monality and improvement.
Parts list has the present standardized repair parts.
2. Stock of Parts
Parts marked with “o” at SP(Supply Code) column of the spare parts list may be not stocked. Therefore,
the delivery date will be delayed.
3. Units Representation
The following represented units are changed or omitted in writing.
Units Representation
Capacitance u F uF
Inductance u H uH
Resistance Z Abbreviation
Temperature d C xxx -DEG-C