Sony BKDS-PA3291, Руководство по обслуживанию

Страница: 16 / 140

1-8(E)
BVS-A3232
1-8. Rack Mounting
c
BVS-A3232 can be mounted on an EIA Standard 19-inch
rack. Be sure to use the following rail kit.
Sony Rack Mount Rail
RMM-30 1 set
• Constituent parts
Rails with bracket 2 pcs
Screws (+PWH 4 X 10) 2 pcs
Plate nut M4 2 pcs
Screw (+B 5
X
8) 8 pcs
n
Usable rack is shown below.
Racks having a depth of 660 to 830 mm
Refer to the Installation Manual packed with the rack
mounting rail RMM-30 for details on how to install to the
rack mounting rail.
1-8. Rack Mounting
Unit: mm
660-830 mm
(26-33
3/4"
)
Front Rear
The maximum movable distance of the BVS-A3232 when mounted on a rack is as follows.
n
BVS-A3232 has the screw holes (M4) for feet mounting in
the bottom panel.
If mounting feet with screws, use the screws to satisfy the
following specification. If not, the BVS-A3232 may be
damaged.
• Screw protrusion : 5 mm or less from the surface of
(After mounting foot) bottom panel.
Rail with bracket
5 mm or less
Foot
Screw
Bottom panel
132
66
Height to the center of slide rail
Height of the unit when mounted in a rack
Maximum movable distance 581