Sony BKDS-PA3291, Руководство по обслуживанию

Страница: 20 / 140

1-12(E)
BVS-A3232
1-12. Settings of Switches and Controls/LED Functions on Board
S4
S8
S5
S6
ND1
S7
S1
COR1
D22
D18
D15
D20 D17
D19
D24
D21
S2
S3
1
1
RV3
RV2
CPU-94 Board (Side A/Component Side)
1-12. Settings of Switches and Controls/LED Functions on Board
n
Addresses of components on the board are shown in parentheses following reference number.
1-12-1. CPU-94 Board (BVS-A3232, BKDS-RS1690)
Factory Setting List
SW No. Set Position Remarks
S1 S1-1 SYNC Upper Position
S1-2 – Lower Position
S1-3 M Lower Position
S1-4 – Lower Position
S4 1
S5 All ON
S6 All ON
S7 0
S8 S8-1 to S8-3 ON
S8-4 to S8-8 OFF
COR1 ON
S1 (A-8): (DIP switch)
The factory setting is as follows.
(The mark indicates the switch lever position.)
• S1-1: SW POINT
This switch selects switch timing, synchronous or asynchronous with the crosspoint for the reference video signal.
Upper position (SYNC) : Signal is switched synchronous with the reference video signal. (Factory setting)
Lower position (ASYNC) : Signal is switched asynchronous with the reference video signal.
• S1-2: KILL
All activity is shut down if the switch is set to the upper position (KILL ON).
Be sure to set to the lower position in usual.
Factory setting: Lower position (KILL OFF)
• S1-3: M/S Switch
This switch defines this unit as the primary station or the secondary station on the S-BUS link.
Upper position (S) : Secondary station
Lower position (M) : Primary station (Factory setting)
LED D24 (M/S lamp) lights.
n
Do not set two or more primary stations on a single S-BUS data link.
• S1-4: NTSC/PAL Mode
This switch selects the timecode format but not used in the BVS-A3232.
Factory setting: Lower position (NTSC)
(UPPER)
(LOWER)
1 2 3 4