Sony AIT-SDX460, Руководство по техническим характеристикам продукции

Страница: 73 / 192

7. ATAPI Packet Command Specification
SONY AIT-1Turbo drive SDX-460V series Ver.1.0 7-1
7. ATAPI Packet Command Specification
This section includes all supported ATAPI commands for this drive.
All of the ATAPI commands are 12 bytes in length, therefore any of the following commands which are listed as 6
and 10 bytes in length are padded to 12 bytes at the trailing end. The following is a list of the supported ATAPI
Commands and page index:
Table 7-1: ATAPI Packet Command List
Command Description OP code Media
Access
Page
ERASE 19h Yes 7-2
INQUIRY 12h 7-3
LOAD/UNLOAD 1Bh Yes 7-7
LOCATE 2Bh Yes 7-8
LOG SELECT 4Ch 7-9
LOG SENSE 4Dh 7-12
MODE SELECT 15h 7-30
MODE SENSE 1Ah 7-32
PREVENT ALLOW MEDIUM
REMOVAL
1Eh 7-48
READ 08h Yes 7-49
READ BLOCK LIMITS 05h 7-51
READ BUFFER 3Ch 7-52
READ POSITION 34h Yes 7-54
RECEIVE DIAGNOSTIC RESULTS 1Ch 7-56
RELEASE UNIT 17h 7-58
REQUEST BLOCK ADDRESS 02h Yes 7-59
REQUEST SENSE 03h 7-60
RESERVE UNIT 16h 7-68
REWIND 01h Yes 7-69
SEEK BLOCK 0Ch Yes 7-70
SEND DIAGNOSTICS 1Dh 7-71
SPACE 11h Yes 7-73
TEST UNIT READY 00h 7-76
VERIFY 13h Yes 7-77
WRITE 0Ah Yes 7-79
WRITE BUFFER 3Bh 7-80
WRITE FILEMARK 10h Yes 7-82
Note: The device will terminate the command with a CHECK CONDITION status and the sense key will be set to
ILLEGAL REQUEST when a reserved bit, byte, field or code is not ZERO.