Sony AIT-SDX460, Руководство по техническим характеристикам продукции

Страница: 16 / 192

2. Specification
SONY AIT-1 Turbo drive SDX-460V series Ver.1.0
2-4
2.1.2. Weight
SDX-460V/P 740 grams, without a cassette and a front bezel.
SDX-460V/RP 970 grams, without a cassette and a front bezel.
2.1.3.
Connectors
The SDX-460V has a IDE connector with a power connector and Jumpers at the positions shown in Figure 2-3. All
other connectors are for use by Sony’s manufacturing and service facilities only.
Figure 2-3: Connector Positions
2.1.3.1. IDE Cables
ATA/ATAPI-6 configuration are supported by SDX-460V.
The hardware specification of this interface can be found in Annex A connectors and cable assemblies of the ANSI
INCITS 361-2002.
2.2. Environmental Specifications
The specifications which apply when media is present may be different than these.
2.2.1.
Temperature and Humidity Range
Temperature
Operating 5 °C to 40 °C (
∆
T < 10 °C/h)
Non-Operating (mech.) -40 °C to 70 °C (
∆
T < 20 °C/h)
Non-Operating (tape) -40 °C to 45 °C (
∆
T < 20 °C/h)
Humidity
Operating 20 to 80% RH, non-condensing
Maximum wet bulb temperature: 26 °C
Non-operating (mech.) 5 to 95%RH (
∆
RH<30%/h)
Maximum wet bulb temperature: 45 °C
Non-operating (tape) 20 to 80%RH (
∆
RH<30%/h)
Note: Please keep cool the drive's heatsink.