Sonus Faber Lilium, Руководство пользователя

Страница: 24 / 48

Infra Woofer
Sonus faber SW26 XT-08. Sonus faber designed a 260 mm infra woofer, lightweight
hard paper composite sandwich cone technology for a maximum rigidity and
implemented it in an acoustically amorphous passive radiator tuned separated
enclosure. The unit features a very powerful long throw motor with a 2.5” voice coil
for ultra dynamic linearity. To perfectly match the low-end performance to different
listening rooms it is possible to adapt the SPL of the infra woofer.
Cross-over
Non-resonant design, optimized amplitude/phase response for optimal space/time
performance. “Paracross topology”. The impedance at low frequencies is controlled
for a clear and friendly amplifier performance. Double staggered transfer function
low frequency/room interface optimized filter. Highest quality is used in terms of
the components: Mundorf “Supreme” Silver/Gold/Oil capacitors, Jantzen inductors.
Cross-over: 80Hz - 250 Hz - 2500Hz.
Frequency
Response
20 Hz – 35.000 Hz, Stealth reflex included.
Sensitivity
92 db SPL (2.83V/1 m).
Nominal Impedance
4 ohm.
Suggested Amplifier
Power Output
100W – 800W, without clipping.
Long-Term Max
Input Voltage
(Iec 268-5)
30 V rms
Dimensions
160cm x 491cm x 705cm (HxWxD).
Weight
103 Kg each – net weight
156 kg each - shipping weight
(The shipping weight may slightly change from time to time because different
humidity values over the year might affect the wooden boxes’weight).