6
2.4 Power supply
The device is operated with electrical power, which means that there is the fundamental danger
of receiving an electric shock. Therefore pay particular attention to the following:
Never touch the power plug with wet hands.
If you want to pull the power plug out of the power socket, always pull directly on the power
plug. Never pull on the cable since it might tear.
Make sure that unrestricted access to the used power socket is guaranteed at any time so
that the power plug may be pulled out immediately in an emergency situation.
Make sure that the power cable doesn’t get bent, pinched or run over. Place the power cab-
le in such a way that it will not result in stumbling or be reachable by children.
Only use extension cables that are designed for the device’s power consumption.
Keep the device away from rain and moisture as well as heat sources.
device and power plug corresponds to the voltage of your power socket. Incorrect voltage
can destroy the device.
you are not using the device for a longer time period. To do this, pull the power plug from
the power socket.
2.5 Batteries
Remove the batteries from the battery compartment as soon as they are spent or if the
device will presumably not be used for a longer time period.
Do not try to recharge non-rechargeable batteries. Do not try to open the batteries or short-
circuit them. There is a danger of explosion.
Liquid that is released if the batteries are used improperly can lead to skin irritations. If you
come in contact with this liquid, rinse it with a lot of water. If the liquid gets into the eyes,
do not rub the eyes but immediately rinse them for ten minutes with water and consult a
physician at once.
2.6 eDock (optional erhältlich)
Only connect the eDock if the cable and plug as well as the adapter itself are undamaged. You
should therefore pay attention to the following:
Do not try to disassemble the adapter. It does not contain any serviceable parts. If the adap-
ter or the cable shows a defect, contact an authorized specialized dealer.
Make sure that the adapter is subject to the same environmental conditions as described
below under 2.8.
