30
7 Appendix 1
The USB Serial Port Settings are: BAUD: 115200, DATA BITS: 8, STOP BITS: 1,
PARITY: EVEN.
All commands sent to the S0 v2 should be terminated with Carriage Return.
Get serial number
Returns the factory set serial number of the unit
Command to S0 v2 Response from S0 v2
SER:
SER:ccccccc
where
c = 7 digit serial number
Get unit ID
ZĞƚƵƌŶƐƚŚĞƵŶŝƚŝĚĞŶƟĮĞƌƐƉĞĐŝĮĐƚŽƚŚĞ^ϬǀϮŵŝdžĞƌ
Command to S0 v2 Response from S0 v2
UID:
UID:S0 v2
Read firmware version information
Returns the firmware version number
Command to S0 v2 Response from S0 v2
VER:
VER:m.nnn
where
m = major version number
nnn = minor version number
ZĞƚƵƌŶĂůůƐĞƫŶŐƐƚŽĚĞĨĂƵůƚƐ
ZĞƐĞƚƐĂůůƐĞƫŶŐƐƚŽĨĂĐƚŽƌLJĚĞĨĂƵůƚƐ
Command to S0 v2 Response from S0 v2
DSU:
ACK:
Get channel control status
Returns the control states for the specified channel
Command to S0 v2 Response from S0 v2
STAC:c
STAC:ss
if the command was successfully completed
ERR
if the parameter is out of range
where
c = channel identifier (1-9),
ss = channel status (0-3Fh)
channel status =
bits 1:0 = input selected (0=input1, 1=input2,
2=input3)
bit 2 = PGM bus state (0=off, 1=on)
bit 3 = REC bus state (0=off, 1=on)
bit 4 = PFL bus state (0=off, 1=on)
bit 5 = fader state (0=down, 1=up)
Get all channels control status
Returns the control states for all channels
Command to S0 v2 Response from S0 v2
STAC:0
STAC:11_22_33_44_55_66_77_88_99
where
11 = channel status
22 = channel 2 status
33 = channel 3 status
44 = channel 4 status
55 = channel 5 status
66 = channel 6 status
77 = channel 7 status
88 = channel 8 status
99 = channel 9 status
channel status = bits 1:0 = input selected (0=input1,
1=input2, 2=input3)
ďŝƚϮсW'DďƵƐƐƚĂƚĞ;ϬсŽī͕ϭсŽŶͿ
ďŝƚϯсZďƵƐƐƚĂƚĞ;ϬсŽī͕ϭсŽŶͿ
ďŝƚϰсW&>ďƵƐƐƚĂƚĞ;ϬсŽī͕ϭсŽŶͿ
bit 5 = fader state (0=down, 1=up)
Get START button LED status
Returns the status of the START button on the specified channel
Command to S0 v2 Response from S0 v2
STAS:c
STAS:s
if the command was successfully completed
ERR
if the parameter is out of range
where
c = channel identifier (1-9)
s = LED state (0-9) 0 = off
1 = red
2 = green
3 = amber
4 = flash red
5 = flash green
7. Appendix 1: S0 v2 – USB Serial Command Set
Содержание S0 v2
