Sonifex S0 v2, Руководство пользователя

Страница: 18 / 52

8
2 User Guide
FADER Control
The 100mm VCA fader is a linear level control that
operates between fully attenuated in its lowest
position to unity gain when fully open.
START Button
This button has a different function depending on
whether MIC or LINE is selected. When in MIC mode,
the button is an indicator and shows the state of the
channel and the remote output as follows:
Off The channel is not routed to either
the PGM or REC bus.
Illuminated Red The channel is routed to the PGM
or REC bus, the fader is closed and
the remote stop output is enabled.
Illuminated Green The channel is routed to the PGM
or REC bus, the fader is open and
the remote start output is enabled.
This is the default operation when in MIC mode, but this
can be changed in the Configuration Options.
When in LINE mode, the button indicates the state of the
channel, and also controls the operation of the remote
outputs as follows:
Off The remote outputs are disabled.
Pressing the button will enable/
disable the remote outputs, but
they can only be disabled when the
fader is closed.
Flashing Red The remote outputs are enabled,
but the channel is not currently
Fig 2-4: Channel 1
FADER Control &
START Button.
routed to the PGM or REC bus so the remote start and
stop outputs are inactive.
Illuminated Red The remote outputs are enabled, the channel is
routed to the PGM or REC bus and the fader is closed.
If the fader is opened, the remote start output will
become active and give a momentary pulse for
0.5 seconds.
Illuminated Green The remote outputs are enabled, the channel is
routed to the PGM or REC bus and the fader is open.
If the button is pressed, the remote start output will
become active and give a momentary pulse for
0.5 seconds. If the fader is closed, the remote stop
will become active and give a momentary pulse for
0.5 seconds.
This is the default operation when in LINE mode, but
this can be changed in the Configuration Options.
Channels 5-8 Dual Stereo
Unbalanced Line/USB Audio Inputs
LINE INPUTS
The dual stereo unbalanced RCA phonos are the
line inputs to the channel. They have 10dB of gain
at the input and are designed to connect directly to
consumer level equipment such as CD players and
other hi-fi equipment. There are two stereo inputs per
channel fader.
REMOTE OUTPUT
This 6.35mm (¼”) stereo jack socket is the remote
output for the channel. It can be used to control
external equipment such as starting a CD player. There
Fig 2-5: Channel
5 Rear Panel
Connectors.