Sonifex S0 v2, Руководство пользователя

Страница: 21 / 52

11
User Guide 2
PGM Button
This button allows the output of the channel to be mixed onto the Program
Bus output. The button is illuminated green to indicate the channel is active
on the Program Bus. This button can be disabled via the Configuration
Options, so that it is permanently on or off.
HANDSET
This RJ11 socket is the connection for an analogue telephone handset. With
the S0 v2 connected to an analogue telephone line, the handset allows calls
to be made and received.
CF/OUT
This 3.5mm stereo jack socket provides a consumer level cleanfeed output.
It is possible to connect the S0 v2 to a PC in order to use VOIP software such
as Skype®. For a connection diagram, see Fig 2-10.
REMOTE OUTPUT
This 6.35mm (¼”) stereo jack socket is the remote output for the channel.
It can indicate the status of the telephone interface when the channel is in
TEL mode, or it can be used to control external equipment such as starting
a CD player when the channel is in AUX mode. There are 2 separate signals,
remote start and remote stop which are both open collector outputs. These
signals can be configured to act differently depending on the input selected.
The remote output settings are part of the Configuration Options.
TEL/AUX Button
Pressing this button changes the channel input connection
between TEL and AUX. There are two auxiliary inputs to
channel 9, one on the rear panel and one on the front panel
below the monitor mute indicator. By default, these inputs
can be independently selected. The button is illuminated
red to indicate when the rear panel AUX input is selected,
and amber to indicate when the front panel AUX input is selected. When
the channels fader is open, the input selection cannot be changed. This
button can be disabled so that the selected input cannot be changed. The
button operation settings are part of the Configuration Options.
Fig 2-9:
Channel 9 TEL/
AUX Button.
Fig 2-10: Connection Diagram For Channel 9 For PC VOIP Application.