Sonic SCS-60, Руководство по эксплуатации

Страница: 79 / 94

7-9
(xiii) Jumper pin for determining contact signal output operation
In JP1 setting, the operation of the contact signal output is determined. Please
change the setting as necessary.
Table: JP1 setting (operation of the contact signal output)
JP1 setting Operation of the contact signal output
1-2 shortcut
(before
shipment) The contact is ON when the hoisting system is at the
upper limit.
2-3 shortcut The contact is ON when the hoisting system is in
operation (ascending/descending).
Open The contact is always OFF.
(xiv) TB201 connector (CB561)
Connector for connecting the CB561 cables
Table: TB201 pin assignment
TB201 CB561
wire color Signal name Signal direction
1 Brown HOLD
Processor → hoisting
system
2 Red FALL
Processor → hoisting
system
3 Orange BUZZER
Processor → hoisting
system
4 Yellow GND_ISO
－
5 Green LOWER_LIMIT_ISO
Hoisting system →
processor
6 Blue UPPER_LIMIT_ISO
Hoisting system →
processor
7 Light blue CLINO
Processor → hoisting
system
8 Gray
CLINO_ON_OFF− Processor → hoisting
system
9 White CLINO_422A
Hoisting system →
processor
10 Black CLINO_422B
Hoisting system →
processor